Here is my newly finished VTA ST70 together with SEAS A26 loudspeaker (a Dynaco A25 clone).
5 posters
Newly finished VTA ST70
hwaitung- Posts : 14
Join date : 2018-05-05
Oldtube likes this post
demarko69- Posts : 7
Join date : 2018-06-20
great job!
ttownscott- Posts : 40
Join date : 2018-07-31
Age : 59
Location : Tacoma, WA
Nice photos! Are the speakers kits as well?
hwaitung- Posts : 14
Join date : 2018-05-05
ttownscott wrote:Nice photos! Are the speakers kits as well?
The design is from SEAS SEAS A26. There are a couple places selling the full kit such as madisound A26 Kit.
For me, it is way too expensive to ship the cabinet to Hong Kong, so I have a builder built the cabinet for me locally and sourced the drivers from Europe. The cross over parts include only a capacitor and a resistor that can easily be found anywhere.
hwaitung- Posts : 14
Join date : 2018-05-05
Here are some photos of the A26 before it was finished.
IMG_0746 by hwaitung, on Flickr
Seas Woofer H1411-08 A26RE4 (Cone) by hwaitung, on Flickr
Seas Woofer H1411-08 A26RE4 (underside) by hwaitung, on Flickr
Seas Tweeter E0055-06 T35C002 by hwaitung, on Flickr
Seas Tweeter E0055-06 T35C002 by hwaitung, on Flickr
IMG_0746 by hwaitung, on FlickrSeas Woofer H1411-08 A26RE4 (Cone) by hwaitung, on FlickrSeas Woofer H1411-08 A26RE4 (underside) by hwaitung, on FlickrSeas Tweeter E0055-06 T35C002 by hwaitung, on FlickrSeas Tweeter E0055-06 T35C002 by hwaitung, on Flickr
dmagazz- Posts : 147
Join date : 2018-06-20
Age : 56
Location : new fairf, ct
very very sweet
ttownscott- Posts : 40
Join date : 2018-07-31
Age : 59
Location : Tacoma, WA
Very cool. Your cabinet looks very good compared to the kit anyway!
Guest- Guest
.
Last edited by PeterCapo on Mon Nov 30, 2020 4:04 pm; edited 1 time in total
Danner- Posts : 16
Join date : 2012-09-27
Even though my primary speakers are Klipsch Cornwalls, those A26 speaker kits look just fantastic. Might need to order a pair.
How much power do you suppose is the minimum to drive them? I ask because my primary amp is an SCA-35 (17.4 watts per channel).
Thanks.
How much power do you suppose is the minimum to drive them? I ask because my primary amp is an SCA-35 (17.4 watts per channel).
Thanks.
hwaitung- Posts : 14
Join date : 2018-05-05
Danner wrote:Even though my primary speakers are Klipsch Cornwalls, those A26 speaker kits look just fantastic. Might need to order a pair.
How much power do you suppose is the minimum to drive them? I ask because my primary amp is an SCA-35 (17.4 watts per channel).
That's hard to say as I have not tried a low power amp with the A26. When driving it with Bob's VTA ST70, I only need to turn the volume to around 50% and that's pretty loud already.
|
|
|